Rotery screen constructed out of perforated plate alongwith center shaft supported on heavy bearings, drive through crown and pinion gear covered at top with discharge chute.
Application
Model
Size
Power
Req.H.P
PRI - l
2' x 9'
1 HP
PRI - ll
3' x 12'
2 HP
PRI - lll
3' x 15'
3 HP
PRI - lV
4' x 15'
5 HP
2. Rotary cooler
Coolers also have a
rotating shell but they are of smaller size does not require
refractories since they are being used to cool the material; usually the
material is received from Rotary Kiln for cooling. Mostly air is being
used, and sometime water is also being spread on shell keep the shell
cool.
This cooler is
usually installed just next to the kilns to make the handling of the
material comfortable for further process.
Capacity
Rotary Cooler are
available start from 1 mtr dia to 3 mtr dia and length from 5 mtr to 50
mtr, which will be designed on the following specification.
1. Particle size and density and other physical properties of the material
2. Maximum and minimum temperature of Calcination
3. Production capacity in Ton per hour
