U-Mixer mixes and blends the feed material from the hopper. Where a fine blending or mixing of material, with uniform output is required Precious U-Blenders are the best. The blades are so designed that they may mix/blend the material very uniformly in a very short time, with minimum load on the drive. Leak proof working due to sealing blocks is assured. These blenders are also available with all contact parts of Stainless Steel. The feeding will take place from hopper through top cover, while discharge may be taken out either from center or from the end, with the help of a screwed door. This out material again sent to elevator. This elevator has two outputs that provide two type of material. One fine material which is sent to fourth elevator for screening or direct for packing as customer requirement and remain material that is to be sent for further process.